.
Features of the first self-contained
Cold Cathode Fixture*!


Standard UL-IFAY 
Cold Cathode Systems:
.

Neotek's UL-UXYT 
Cold Cathode Systems:
.

UL parts with instructions, you put it together. Never tested as a system.
.
Completed fixtures. UL tested and approved as a factory assembled system.
.
Not dimmable with a high power factor.
.
High power factor is dimmable.
.
Normal (low) power factor dimmable to about 15% flickers at low levels.
.
Dimmable to 1% no flicker.

.
Exposed electrodes causes blue argon light leakage.
.
All electrodes and parts enclosed in aluminum extrusion.
.
Has 60 cycle hum.
.
No noise.
.
Remote transformers, needs access.
.
No remote transformers, self contained.
.
Transformers not UL 2161 approved.
.
Transformers are UL2161 approved.
.
No secondary fault detectors.

.
Has secondary fault detectors, and "smart" technology for timed retesting.
.
Most systems are high voltage, not approved for residences.
.
Low voltage, approved for residences.

.
Lamp only supported by electrodes.
.
Lamp fully supported by extrusion.
.
Not rated for outdoor use.
.
Approved for outdoors with lens cover.
.
Exposed conduits.
.
Extrusion is wire way, no exposed wires.
..

* Protected under US pat. #6,050,700. "UL" and the UL Mark are registered to Underwriters Laboratories, Inc.

neokneotek lighting, neotek, cold cathode, cold cathode systems, neon, neotek, co